Biotronix Rechargeable 810nm 650nm Handy Cold Laser Therapy Machine for Pain Relief Medical Reacher & Grabber  (Length 10 cm)

Biotronix Rechargeable 810nm 650nm handy Infrared Treatment cold laser therapy device for pain relief LLLT low level laser Handy LaserTherapy Acupuncture Device - Hand Held The cells are then stimulated and respond with a higher rate of metabolism. This results in relief from pain, better circulation, anti-inflammation and accelerating of the healing process. Laser delivers non-thermal (non heat) photons of light to the body to help heal injured cells. Light, portable and rechargeable for continuous use of up to 4 hours. Can be used for treatment while charging. Suitable for both Professional, Personal and Animal use; Pets, Dogs Horses. Total maximum power 510 mw Easy to operate with user-friendly guide included. STRAIGHTEN THE DEVICE All three (3) lights must be green for the device to be calibrated. Press the start/stop button on the device’s lens side and place it in your palm to calibrate. The device will automatically calibrate and the display lights will countdown from 1 to 3 as the calibration is completed. It will take 6 seconds to calibrate the device. WEAR SAFETY GOGGLES Now that the device is ready, you can treat the injured or painful area. The safety goggles are mandatory for you to put on, as well as any person who will assist with the treatment.Safety goggles is provided with this device. CHOOSE A TREATMENT MODE There are three (3) treatment modes to choose from with this device. Changing the treatment mode by pressing the “mode” button will toggle between treatment modes 1, 2, and 3. See the following table for information on which mode is most suitable for your injury/pain. TREAT THE INJURE Place the device on the injury/pain site and press the “start/stop” button after selecting the mode. A laser treatment will start once the device is turned on. Don’t move the device. Keep the laser in the same location for the entire 5 minute treatment. Upon completion, the device automatically turns off. The patient can perform one or two treatments per day. Keep treatments to a maximum of two per day. Quick Details: Instrument classification: Class II Laser wavelength:650nm + 808nm Material:ABS Working mode:Continuous/Pulse Terminal laser output:3 laser beams with 808nm, 12 laser beams with 650nm Time setting:15-60 minutes