Cart

Quick Sense (Qs-11): 180` Wall-Mount LUX , Time , Sensitivity Adjustment Automatic 220V PIR Energy Saving Light and Motion Sensor Switch, White 3 A Motion Sensor Electrical Switch (Pack of 1 Number of Switches - 1)

Price: Not Available

अभी उपलब्ध नहीं है

Highlights

Motion Sensor Switch
Number of Switches: 1
Made of Plastic
Maximum Current: 3 A
Pack of: 1

जानकारी

1. Press the program button and release. The first on setting can be made now .| 2. Press week button to set the day or blocks of days. Set the time by pressing the hour button and then min button.|3. Press the prog button again to finish the first on setting and enter into the first off setting. By repeating 2 to make the first off setting.|4. Press the prog button again to finish the first off setting and enter into the 2 on setting. Repeat 2 and 3 to program remaining settings.|5. After completing setting, press the clock button and the timer is ready to operate.

Specifications

In The Box

Pack of

General

Brand	Quick Sense
Model Number	(Qs-11) 180` 220V Wall-mount PIR Motion Sensor Switch
Model Name	(Qs-11): 180` Wall-Mount LUX , Time , Sensitivity Adjustment Automatic 220V PIR Energy Saving Light and Motion Sensor Switch, White
Type	Motion Sensor
Color	White
Shade	White
Material	Plastic
Number of Switches	1
Net Quantity	1

Power Features

Maximum Current	3 A
Maximum Voltage	230 V
Other Power Features	Operating Volt: AC 220-250V 50Hz-60Hz., Load power: Upto 300/1200W Max, Load type: Incandescent lamp, LED light, CLF, fans, etc, Installtion Hight: 2.2-4 m

Additional Features

Other Features

Operating Volt: AC 220-250V 50Hz-60Hz. Load power: Upto 300/1200W Max Ambient Light: 3-2000 (Adjuestable) Load type: Incandescent lamp, LED light, CLF, fans, etc Detecting distance: 0~9M Detecting Angle: 180 Degree. Installtion Hight: 2.2-4 m Motion Detetion Speed: 0.6~1m/s Power Cusumption:0.1W (static) ; 0.4(Work) Working Humidity: less than 93%RH Delay: 10 Seconds -7 Minutes (Adjustable)

Dimensions

Other Dimensions

1.Keep Sensor unit 1.6 m higher from the ground level 2. The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily 3. On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily 4. When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, ; then the light will turn on. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.

रेटिंग और रिव्यू

3.9

★

143 Ratings &

18 Reviews