IBM server Hire IBM power10 S1022 Rack Server

HI All We have IBM P10 S1022 server Rental, for more details click the below links. https://www.signwave.in/ibmserver.php Contact No: 9886789678 Power S1022 server The Power S1022 (9105-22A) server is a powerful one- or two-socket server that is available with one or two processors per system, with the following options: One or two 12-core Power10 processors running at a typical 2.90 - 4.0 GHz (maximum) Two 16-core Power10 processors running at a typical 2.75 - 4.0 GHz (maximum) Two 20 core Power10 processor running at a typical 2.45 - 3.90 GHz (maximum) All processor cores can run up to eight simultaneous threads to deliver greater throughput. When two sockets are populated, both must be the same processor model. The Power S1022 supports Capacity Upgrade on Demand, where processor activations can be purchased when they are required by workloads. A minimum of 50% of the installed processor cores must be activated and available for use, with activations for the other installed processor cores available to purchase as part of the initial order or as a future upgrade. Static activations are linked only to the system for which they are purchased. The Power S1022 server also can be purchased as part of a Power Private Cloud with Shared Utility Capacity pool. In this case, the system can be purchased with one or more base processor activations, which are shared within the pool of systems. More base Note: The IBM i operating system is not supported on the Power S1022s model with four-core processor option. 6 IBM Power S1014, S1022s, S1022, and S1024 Technical Overview and Introduction processor activations can be added to the pool in the future. A system with static activations can be converted to become part of a Power Private Cloud with Shared Utility Capacity pool. This system is a rack-mount (2U EIA units) form factor with an increased depth over previous 2U Power servers. A rack extension is recommended when installing the Power S1022 server into an IBM Enterprise S42 rack. The Power S1022 server includes 32 DDIMM memory slots, of which 16 are usable when only one processor socket is populated. Each of the memory slots can be populated with a DDIMM that is connected by using the new OMI. These DDIMMs incorporate DDR4 memory chips while delivering increased memory bandwidth of up to 409 GBps peak transfer rates per socket. They also support transparent memory encryption to provide increased data security with no management setup and no performance impact. The system supports up to 4 TB memory capacity with both sockets populated, with a minimum requirement of 32 GB installed per socket.