microware USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable USB Adapter  (Black)

Description: 1. USB2.0 interface, 480Mbps high-speed transfer rate, support 52x CD-ROM 2. Support hard disk, CD-ROM, DVD-ROM, CD-RW, combination device and DVD-RW 3. Support hot swap, plug and play 4. The power supply can be used to input AC voltage of 90V-264V 5. Support Windows 98SE, Windows 2000, Windows me, Windows XP, Mac OS operating system 6. Under Windows 2000/ME/XP operating system, no driver is required 7. Support 2.5’’/3.5"SATA/IDE HDD, CD/DVD-ROM, CD/DVD-RW, COMBO 8. Compatible with USB2.0, USB 1.1 and USB 1.0 9. SATA and IDE can be connected at the same time 10. IDE and SATA devices are easy to connect and easy to carry Specification: 1. Chip: JM20337(7*7) 2. Support system: Windows 98SE, Windows 2000, Windows me, Windows XP, Mac OS 3. Conversion speed: 480Mbps 4. Working output voltage: 12V/5V two-wire output voltage adapted to SATA/IDE work 5. Working current: 1.5A 6. Interface type: SATA, IDE & USB2.0 Device installation: 1. Confirm that the device is in main mode 2. Connect the SATA/IDE connector to the SATA/IDE device 3. Connect AC power to SATA/IDE device 4. Connect the cable to the USB port of the computer Driver installation: 1. Window 98: Insert the CD into the CD drive, and run X:\win98\setup.exe before the cable is inserted into the computer interface 2. Windows 2000/me/XP: No need to install any drivers 3. Mac8,6 or higher system: Copy Gene USB SATA/IDE_05E3_0702, put it on the left, double click it to get the driver file. Then copy the driver files to [System Folder] [Extensions] After that, connect the cable and restart the system