Skinny PS4 Controller Designer 3M Skin for , PlayStation 4 , PS4 Slim , Ps4 Pro DualShock Remote Wireless Controller - Skull ( Red Blue ), Skin for One Controller Only Gaming Accessory Kit  (Multicolor, For PS4)

Skinny Skin Kit for , PlayStation 4 Proctive is printed with super-high resolution graphics. Skins for PS4 games is easy install and removal. Remote controller will leave behind no games decals residue. skins decals for PS4 playstation 4 controller will prevent dust proof, waterproof, oil proof and fingerprints. Decals for play station 4 custom PS4 controllers will not Scratch, Fade (UV Resistant) or Peel. Stickers for ps4 custom controllers fit PlayStation 4 Controller (Controllers not included). Give your PS4 accessories a new and cool look. Install: 1) Clean the unit's surface as thoroughly as possible.Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease. 2) Peel one piece of Decals from the paper liner. NOT to let the adhesive side touch anything. 3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface. 4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size. 5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time. 6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin. Package Contains: Skins for Play Station Dual shock 4 Controller . - Actual controllers not included.